LANTEE SIGN MOUNTING HARDWARE
Built for a precise, professional finish
Durable standoff hardware creates a clean floating display for acrylic, glass, signage and decorative panels.
01Clean floating display
Creates intentional spacing between the panel and mounting surface for a polished architectural look.
02Made for lasting use
Stainless Steel construction delivers dependable support for home and commercial displays.
03Choose with confidence
Clear dimensions and pack quantities make it easier to plan every mounting point before installation.
AT A GLANCE
Key specifications
Confirm the standoff dimensions, panel opening and package contents before ordering.
- Standoff size
- 5/8" x 1" / 16 x 25mm
- Material
- Stainless Steel
- Finish / color
- Silver
- Package quantity
- 8 Pieces
- Lantee reference
- LTH2008
- Recommended use
- Acrylic, glass, signs and display panels
Installation note: Confirm the panel thickness, panel-hole diameter and wall fastener required for your mounting surface. Screws and anchors are included only when explicitly stated in the product description.
PLAN BEFORE INSTALLING
Three checks for a better result
- 1
Confirm the layout
Mark every mounting point and verify the barrel diameter and overall length suit the intended display.
- 2
Check the panel
Compare the panel thickness and drilled-hole size with the measurements shown in the listing.
- 3
Select wall hardware
Use screws and anchors appropriate for the wall material and the weight of the completed display.
Full product description＋
Dimensions: Totally Size: 16mm x 25 mm, about 0.63" x 0.98". Thread Stud length: 11/16", suggest to hold the glass or panel with a thickness less than 1/2". Thread Stud Diameter: 3/8" Barrel length: 19.5mm, about 3/4" from the wall to the back of the glass or panel. Hole Size: 5mm, about 3/16", will fit for 5mm screw. Easy to Install: 1. Drill holes on your sign, and make sure the hole size range is 9.5mm to 12mm. 2. Mark the holes of your sign on the wall, make sure the sign will install on the right place. 3. Drive the anchor screw to the wall, make sure the screw's diameter is lower than 5mm. 4. Install the barrel on the wall. 5. Put the sign or glass on and thread the stud to the barrel Protect Your Glass: Every standoff have clear rubber spacer between Stud and Barrel, which will protect your glass. Widely Used: These standoffs mount signs, graphics, panels and so much more from a wall, table or counter top. What You Get: 8 Pcs 16x25mm Lantee Standoff Mounts
Product Highlights
- Dimensions: Totally Size: 16mm x 25 mm, about 0.63" x 0.98". Thread Stud length: 11/16", suggest to hold the glass or panel with a thickness less than 1/2". Thread Stud Diameter: 3/8" Barrel length: 19.5mm, about 3/4" from the wall to the back of the glass or panel. Hole Size: 5mm, about 3/16", will fit for 5mm screw.
- Easy to Install: 1. Drill holes on your sign, and make sure the hole size range is 9.5mm to 12mm. 2. Mark the holes of your sign on the wall, make sure the sign will install on the right place. 3. Drive the anchor screw to the wall, make sure the screw's diameter is lower than 5mm. 4. Install the barrel on the wall. 5. Put the sign or glass on and thread the stud to the barrel
- Protect Your Glass: Every standoff have clear rubber spacer between Stud and Barrel, which will protect your glass.
- Widely Used: These standoffs mount signs, graphics, panels and so much more from a wall, table or counter top.
- What You Get: 8 Pcs 16x25mm Lantee Standoff Mounts
Specifications
-
Material: Stainless Steel
-
Color: Silver
-
Size: 5/8" x 1" / 16 x 25mm
-
Package Quantity: 8
